building a sfbd rolling chassis for the girls 1st gen dime - Page 21

dava flav · 11-11-2009, 02:01 AM

Quote:

Originally Posted by numatk_07

I know you aren't using the torch for that, just wondering how nick thought you could radius with a torch. You just use a regular grinder to radius?

yea just a grinding disk

Quote:

Originally Posted by redsled04

I dont see my engine hoist in any of those pics.That shit best not be outside mo fo.

calm down slut its by the furnace in the corner.

dava flav · 11-15-2009, 11:02 PM

need to 40da the inside bed walls for liner. then wetsand the outside and shes ready for sealer and paint.

dava flav · 11-18-2009, 01:13 AM

cab and bed are in sealer.
just need to finish the inside bed walls and seal the inside bed and sand down the inner fenders and jambs and wetsand the outside then shes leaving.

mmalcolm24 · 11-18-2009, 01:31 AM

Looking really good man nice work. When you hoping to have it on the road?

dava flav · 11-18-2009, 01:39 AM

ahhh i hate this question...lol
im hoping to be able to drive it to our local show in august next year.
i should have the frame and all the susp and tanks basically everything thats gonna need powdercoat. except the axle i need to have that narrowed. i should have all that shit done and start reassembly by feb. but then i still have to have the motor rebuilt and all the little shit to finish adds up fast.
everyboyd i know says i can do it. but im always negative about shit. lol

numatk_07 · 11-18-2009, 04:14 AM

you are one of the faster workers on here that I know. I think August is reasonable time frame.

dava flav · 11-18-2009, 10:25 AM

thanks man.
working hard has always been a good trait for me. i dont like slackers and lollygaggers. lol
the only thing thats gonna hold me back is money.

GMracer · 11-18-2009, 10:36 AM

Quote:

Originally Posted by dava flav

the only thing thats gonna hold me back is money.

amen

mmalcolm24 · 11-18-2009, 11:02 AM

Sounds good man Cant wait to see it all done. Didn't you say it was gonna be at sittin pretti show? If so I will hopefully see you there Im gonna drive down there to hit that show next year.

Jaksonplayer · 11-18-2009, 06:58 PM

Are you going to keep the kp components bridge piece?

bagged00 · 11-18-2009, 08:59 PM

did you put epoxy or etch prime on all that bare metal before you sealed it?? please say yes.

dava flav · Yesterday, 12:50 AM

the sealer i sprayed was ok to be sprayed over baremetal. im only doing what my painter tells me. it was all etched in with 40 grit before i sprayed it.
it says right on the can ok to cover over baremetal.

the kp section isnt just a bridge piece its physically one giant piece that is the tops of both notches. so yes im keeping it hence why i built my floor around it lol.
i cant just take it out

\its the main reason why i bought this frame was because of that notch there isnt to many of them that have the actually notch built into it. its not just a cover.

yes im hopefully gonna have it at the sittin pretti show driving.

dava flav · Yesterday, 01:15 AM

numatk_07 · Yesterday, 03:42 AM

Jaksonplayer · Yesterday, 04:37 PM

I said something because I thought you got rid of all the KP stuff on the truck. Either way the truck is coming along great.

dava flav · Yesterday, 08:39 PM

i got rid of the rear kit. but im prob gonna get some of their arms and i got their gauges. lol

11-15-2009, 11:02 PM	#502
dava flav GMFS Senior Member Join Date: Aug 2006 Location: bothell, wa Name: Dave Age: 28 Posts: 6,157	Re: building a sfbd rolling chassis for the girls 1st gen dime need to 40da the inside bed walls for liner. then wetsand the outside and shes ready for sealer and paint.

11-18-2009, 01:13 AM	#503
dava flav GMFS Senior Member Join Date: Aug 2006 Location: bothell, wa Name: Dave Age: 28 Posts: 6,157	Re: building a sfbd rolling chassis for the girls 1st gen dime cab and bed are in sealer. just need to finish the inside bed walls and seal the inside bed and sand down the inner fenders and jambs and wetsand the outside then shes leaving.

11-18-2009, 01:31 AM	#504
mmalcolm24 GMFS Member GMC Owner Join Date: Nov 2007 Location: Grande Prairie, Alberta Name: Mike Age: 22 Posts: 1,530	Re: building a sfbd rolling chassis for the girls 1st gen dime Looking really good man nice work. When you hoping to have it on the road?
	Thanks to Naranjas_HD for the Sig Ekstensive Metalworks 07+ GM Front End Kit \| KP Components 4 Link and Canti \| Slam Specialties RE7 Bags \| AVS Digital Air Gauge/9 Button Switch Box \| BOSS 313 24x10 \| Pirelli Nero 285/30R24 \| AFE Intake \| Edge Evolution \| Flowmaster Exhaust \| Custom Stereo Enclosure \| HID Headlights \| Clear Headlight \| My Air Ride Install Thread

11-18-2009, 01:39 AM	#505
dava flav GMFS Senior Member Join Date: Aug 2006 Location: bothell, wa Name: Dave Age: 28 Posts: 6,157	Re: building a sfbd rolling chassis for the girls 1st gen dime ahhh i hate this question...lol im hoping to be able to drive it to our local show in august next year. i should have the frame and all the susp and tanks basically everything thats gonna need powdercoat. except the axle i need to have that narrowed. i should have all that shit done and start reassembly by feb. but then i still have to have the motor rebuilt and all the little shit to finish adds up fast. everyboyd i know says i can do it. but im always negative about shit. lol

11-18-2009, 04:14 AM	#506
numatk_07 body droppin Join Date: Dec 2007 Location: Mt Home, Idaho Name: Aaron Age: 27 Posts: 1,467	Re: building a sfbd rolling chassis for the girls 1st gen dime you are one of the faster workers on here that I know. I think August is reasonable time frame.
	2007 Silverado Classic / How To Bag That NBS / Body Drop Thread / Raise The UCA's / Accuair Install / Difference: 16+ And 17+ Spindles

11-18-2009, 10:25 AM	#507
dava flav GMFS Senior Member Join Date: Aug 2006 Location: bothell, wa Name: Dave Age: 28 Posts: 6,157	Re: building a sfbd rolling chassis for the girls 1st gen dime thanks man. working hard has always been a good trait for me. i dont like slackers and lollygaggers. lol the only thing thats gonna hold me back is money.

11-18-2009, 11:02 AM	#509
mmalcolm24 GMFS Member GMC Owner Join Date: Nov 2007 Location: Grande Prairie, Alberta Name: Mike Age: 22 Posts: 1,530	Re: building a sfbd rolling chassis for the girls 1st gen dime Sounds good man Cant wait to see it all done. Didn't you say it was gonna be at sittin pretti show? If so I will hopefully see you there Im gonna drive down there to hit that show next year.
	Thanks to Naranjas_HD for the Sig Ekstensive Metalworks 07+ GM Front End Kit \| KP Components 4 Link and Canti \| Slam Specialties RE7 Bags \| AVS Digital Air Gauge/9 Button Switch Box \| BOSS 313 24x10 \| Pirelli Nero 285/30R24 \| AFE Intake \| Edge Evolution \| Flowmaster Exhaust \| Custom Stereo Enclosure \| HID Headlights \| Clear Headlight \| My Air Ride Install Thread

11-18-2009, 06:58 PM	#510
Jaksonplayer GMFS Member Join Date: Nov 2007 Location: Temecula Name: Jordan Posts: 340	Re: building a sfbd rolling chassis for the girls 1st gen dime Are you going to keep the kp components bridge piece?

11-18-2009, 08:59 PM	#511
bagged00 GMFS Member Join Date: Oct 2006 Location: G-spot, GA Name: ryan Age: 21 Posts: 2,574	Re: building a sfbd rolling chassis for the girls 1st gen dime did you put epoxy or etch prime on all that bare metal before you sealed it?? please say yes.

Yesterday, 12:50 AM	#512
dava flav GMFS Senior Member Join Date: Aug 2006 Location: bothell, wa Name: Dave Age: 28 Posts: 6,157	Re: building a sfbd rolling chassis for the girls 1st gen dime the sealer i sprayed was ok to be sprayed over baremetal. im only doing what my painter tells me. it was all etched in with 40 grit before i sprayed it. it says right on the can ok to cover over baremetal. the kp section isnt just a bridge piece its physically one giant piece that is the tops of both notches. so yes im keeping it hence why i built my floor around it lol. i cant just take it out \its the main reason why i bought this frame was because of that notch there isnt to many of them that have the actually notch built into it. its not just a cover. yes im hopefully gonna have it at the sittin pretti show driving.

Yesterday, 01:15 AM	#513
dava flav GMFS Senior Member Join Date: Aug 2006 Location: bothell, wa Name: Dave Age: 28 Posts: 6,157	Re: building a sfbd rolling chassis for the girls 1st gen dime

Yesterday, 03:42 AM	#514
numatk_07 body droppin Join Date: Dec 2007 Location: Mt Home, Idaho Name: Aaron Age: 27 Posts: 1,467	Re: building a sfbd rolling chassis for the girls 1st gen dime nice
	2007 Silverado Classic / How To Bag That NBS / Body Drop Thread / Raise The UCA's / Accuair Install / Difference: 16+ And 17+ Spindles

Yesterday, 04:37 PM	#515
Jaksonplayer GMFS Member Join Date: Nov 2007 Location: Temecula Name: Jordan Posts: 340	Re: building a sfbd rolling chassis for the girls 1st gen dime I said something because I thought you got rid of all the KP stuff on the truck. Either way the truck is coming along great.

Yesterday, 08:39 PM	#516
dava flav GMFS Senior Member Join Date: Aug 2006 Location: bothell, wa Name: Dave Age: 28 Posts: 6,157	Re: building a sfbd rolling chassis for the girls 1st gen dime i got rid of the rear kit. but im prob gonna get some of their arms and i got their gauges. lol

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)