If this is your first visit, be sure to check out the FAQ by clicking the link above.
You may have to register before you can post: click the register link above to proceed.
To start viewing messages, select the forum that you want to visit from the selection below.
OR go with ART if you want, they might have a kit for it by now..
ART actually makes the front part of the kit for Kelderman. I was talking to kelderman when I bought the front tanks for my truck.
__________________
Thanks to Naranjas_HD for the Sig
Ekstensive Metalworks 07+ GM Front End Kit | KP Components 4 Link and Canti | Slam Specialties RE7 Bags | AVS Digital Air Gauge/9 Button Switch Box | BOSS 313 24x10 | Pirelli Nero 285/30R24 | AFE Intake | Edge Evolution | Flowmaster Exhaust | Custom Stereo Enclosure | HID High, Low and Fog | Clear Headlight | Tinted Tails
yea if you check out his build thread hes got the 2 tanks in the front, but i guess they would only work for the 07+ cus i know on mine they wouldnt fit like that..
Ya check out my build thread I purchased the tank set up for the yukon which puts like 2 3 gallon tanks in front of the motor where the engine cover to keep stuff from hitting the motor would go and then I have a 5 gallon under the bed. The only problem I found with this is how low they sit and I have rubbed them once for twice now that i have worn away some of the metal on the lower control arm mounts.
__________________
Thanks to Naranjas_HD for the Sig
Ekstensive Metalworks 07+ GM Front End Kit | KP Components 4 Link and Canti | Slam Specialties RE7 Bags | AVS Digital Air Gauge/9 Button Switch Box | BOSS 313 24x10 | Pirelli Nero 285/30R24 | AFE Intake | Edge Evolution | Flowmaster Exhaust | Custom Stereo Enclosure | HID High, Low and Fog | Clear Headlight | Tinted Tails
from the experience i had doin mine, you aint gonna buy a kit to lay out a tahoe NOWHERE. seein as how his is a new one at least the front is easier. the cups will lay out xmember on a 275/30/24 cause we just took a set off of my brothers truck; theres just alot of camber. in the back is where it gets fun. my best advice: go get some 2x4, 2x2, 1x1, plate iron, sheetmetal and get to work. i looked forever and nobody i saw sells shit for tahoes.
We make a kit for that truck that will lay frame on up to 28in rims. It is almost identical to the 07+ chevy 1500 kit. 281-442-1050 shop www.ekstensive.com
I forgot all about your kit you guys sell i remember you telling me about it a couple months ago now. If it was my tahoe I would be getting the EKW kit awesome product and the guys are super helpful.
__________________
Thanks to Naranjas_HD for the Sig
Ekstensive Metalworks 07+ GM Front End Kit | KP Components 4 Link and Canti | Slam Specialties RE7 Bags | AVS Digital Air Gauge/9 Button Switch Box | BOSS 313 24x10 | Pirelli Nero 285/30R24 | AFE Intake | Edge Evolution | Flowmaster Exhaust | Custom Stereo Enclosure | HID High, Low and Fog | Clear Headlight | Tinted Tails