Pull the fender liner down and use a big waterpump plier. You only have to pull a couple of the plastic things to make the center of the liner come down enough.
I know the lb7 is tighter there but I thought you could still get a strap wrench on it.
How do you get the fuel filter off of the LB7? I can't get a wrench on there to turn it. I would appreciate any advice.
I've only done it once and the dealership did it another time because there was a recall on the filters. Pretty much what Nick said, oh and once you replace it, cut the old one open and see whats in there. You my have to take a trip to an autoparts store or a stealership because those clips break pretty easy, at least mine have. Heres a how-to thread from Dieselplace, its worth it to sign up if your not already a member there. Some good info
Pull the fender liner down and use a big waterpump plier. You only have to pull a couple of the plastic things to make the center of the liner come down enough.
I know the lb7 is tighter there but I thought you could still get a strap wrench on it.
I'm 100% positive you can.
__________________
2007 2500HD Saharra Crew Cab Derpamax / Artic White / Raised Front Bumper / Cognito 4-6" NTBD / UCA's / Braces / Tie Rods / 285/55-22 Troll Grapplers / 22x10.5 BMF Rehabs / Esky Handles / Painted mirrors / FPE Cheetah 68mm / RDL 3" Bridge and Boost tube / LML manifold / EFILive & DSP5 / Auto Meter Elite Series Boost, Drive & EGT Gaygizz
i got a oil filter band wrench that goes on a ratchet works great
__________________
04 dmax cc sb white 4x4
66 buick gs
2012 kia sorento sx silver
1999 ford f150 xl blue
1989 dodge spirit blue
1983 buick lesabre white
? for Cornell
