This is going to suck

[numatk_07]

When I decided to raise my uca mounts I didn't look at the passenger side. 3 out of 4 will be easy but the front one is going to fuck me sideways. Check it out. Any suggestions are welcome.

The square is perpendicular to the ground and touching the top part of the frame. Its about 5/8 to 3/4 gap at the bottom.







Im sure I can figure something out but at this point I'm just sittin here staring at it. any suggestions?

[numatk_07]

I got it half way figured out.

[badz24s]

you sir, have a mighty big set of balls cutting on that frame. I have always said that when I get a truck, Ima bag it; but now that I have one, it's a different story.

[Joakwin]

hummm, i'll go and check the pictures tomorrow on the good computers

i get red x's at work right now

[numatk_07]

Originally Posted by Joakwin

hummm, i'll go and check the pictures tomorrow on the good computers

i get red x's at work right now

That's ll I ever got when I was over there. Where are you at? I heard that some of the army guys had computers without filters when I was at Kirkuk.

[numatk_07]

Originally Posted by badz24s

you sir, have a mighty big set of balls cutting on that frame. I have always said that when I get a truck, Ima bag it; but now that I have one, it's a different story.

I get it all the time "you cut up a brand new truck?"

I get that almost as much as the mexican thing.

[numatk_07]

Look at the pies I took out on top of the frame.

[dava flav]

your smart doing the hard one first thats the best way to handle a situation like that. most chicken out and wait to do it last then shit never gets finished cuz they get discouraged.
but it doesnt look like it was overall that bad. ill call you tomm.

[dava flav]

ohh and its bent like that becuase of a dumb ass radiator hose

[bagged00]

im really confused on how the hell u move this up...

[baggedcc07]

looks good. i'm planning on raising mine up in a couple of weeks.

[on1wheel06]

looks good!
are you just raising the upper arms, or are you narrowing your track width?

[numatk_07]

Originally Posted by on1wheel06

looks good!
are you just raising the upper arms, or are you narrowing your track width?

I am raising the uca's and narrowing the track width. If I was just raising the uca's I would have been done by now. Narrowing the track width is what made this hard. I had to bring them in at least 1/2" if I want to shorten the lca's 1". I can do the rest on the uppers with the cam adjustment. This was way harder than I thoght it was going to be but like Dava Flav said, I got the hard part done first. I aint no dummy so I wanted to make sure it was possible to tackle the hard one first. I have a plan to finish the rest on that front one and then the others should be easy. I thought this was going to be a big project and it turned into a bigger one. I'm okay with it though. I am ready for little camber change. Hopefully the reasearch pays off. And hopefully it all works out so I can make a detailed thread on how to do this so others can do it without thinking. I'll be the ginnie pig. Not to make it seam like this is ground breaking technology. I just haven't seen a write up on this.

[numatk_07]

I'm surprised! 179 views and only 6 people decided to make a coment. I guess I'm an attention whore for even mentioning it but I really expected more. Oh well, I can cry myself to sleep tonight.

More to come on this bitch soon. As long as I don't get over worked this week I should be able to get a decent amount more work done.

[NXT GP NOVA]

Looks good, so you only moved the upper in 1/2 inch in relation to the 1" the lowers are goin to be shorter?