cranking tks on top of rcd suspension lift

[Got2BLifted]

sup guys, had a quick question, i have a 6 inch suspension lift on my 94 k1500, want more height was thinking about cranking the keys 1.5 inches to bring it to 7.5 inch lift and throw a 1 inch block in the back on top of the 4 inch blocks. Will the angle be to much for the driveshaft. Is this a good idea or what thanks

[mike.]

I'd probably not stack the blocks.

[Got2BLifted]

or i could just spend the money and get 5 inch blocks or some 5.5 inch blocks

[Hoyt]

you'll be fine, but don't add another block

[Crunk]

Don't stack the blocks for sure and I'm not sure if you'll be able to get another 1.5" of crank outta your stock keys without throwing your alignment specs outta reach. I'd either get ford keys or HD bars and crank your keys then

[Got2BLifted]

i have new keys the ones you can crank to 3 inches you think i should put those in and buy 5 inch blocks

[Got2BLifted]

i actually have a 3 inch body lift on my truck right now and installing my rcx lift next week, but for some reason my dads making me take out my body lift cuz he sais itll be to top heavy, so i kind of want at least 7 or 8 inches of lift all suspension preferably, im only going to be running 36's

[Crunk]

Slap ur dad seriously! I have the exact set up right now with 37s and I've never once felt like my truck was goin to tip over and that's makin some sharp ass turns at 50 easy

[Moondoggy-47]

I run 6 plus 3. Mine not top heavy to the point where it dangerous. Just leave the body lift on.

[Got2BLifted]

Originally Posted by Crunk

Slap ur dad seriously! I have the exact set up right now with 37s and I've never once felt like my truck was goin to tip over and that's makin some sharp ass turns at 50 easy

hahah, my truck looks just like yours except for the rims nd tires lol