cam for 5.7 tbi 4x4

[oakleyguy]

i am running a cold air intake, a cat back exhaust system, cooler stat, planning on elect fans, and a tuner in future but i would like to get a cam and heads in the near future any good ideas? daily driver with a little tree pulling and offroading everyonce in a while

[Mudd Duk]

Contact Bullet Cams, thats what I have on my 90 tbi and it's produced respectable numbers out of a stock head. Yes, the rest of my engine has been built pretty decently, but before all of that work I still had a Bullet cam, more like an RV cam, but it does help out the ol' tbi. It has a decent sounding idle, no need for an upgraded stall, and with a few upgrades, headers, intake, and a chip in your case, it will really impress you. Look for something in the 205/215 range.

[Rhino79]

I agree, I had a 92 2wd that I ran a 210/216 i believe, .440 .454 lift. It made great power from off idle to about 5500. The tbi's don't breath up top with the swirl port heads so dont look for a big cam.

[MeanGreenZ71]

Check out the TBI thread in the performance section. Getting enough fuel pressure really woke my old TBI 350 up.

[Rhino79]

Yeah, I had a JET FPR and it really helped.