Audio & Electronics Stereo equipment and other electronics.
Sponsored By:
#1
New Member
Join Date: May 2012
Location: Utah
Name: Ty
Posts: 5
Bucket to bench swap, now no rear speakers.
After doing some searching, I have found that this a hurdle that all run into with this swap.
Advertisement
Sponsored links
#2
GMFS Member
Join Date: Dec 2005
Location: Berkeley CA
Age: 38
Posts: 2,703
Re: Bucket to bench swap, now no rear speakers.
ok so you swaped seats and now you have no rear audio..... sound goofy to me.
#3
New Member
Join Date: May 2012
Location: Utah
Name: Ty
Posts: 5
Re: Bucket to bench swap, now no rear speakers.
My truck comes with the Bose sound system, and to my understanding when you take out the back seat radio controls (which are removed when the center console is taken out).
#4
GMFS Member
Join Date: Dec 2005
Location: Berkeley CA
Age: 38
Posts: 2,703
Re: Bucket to bench swap, now no rear speakers.
ok now i understand. Well if you take the whole console out, then you loose the whole soundsystem. The guts of the BLOSE radio are in the console. I'd go aftermarket radio. Unless you can relocate all that stuff somewhere els, including the BLOSE sub; they system will sound real thin w/ out the sub.
#5
GMFS Member
Join Date: Sep 2009
Location: Stillwater, Oklahoma
Name: Blake
Age: 22
Posts: 438
Re: Bucket to bench swap, now no rear speakers.
Your bose amp and everything is in the console. When you have bose your speakers are powered by this amp and not the raio, so if you don't put that amp back in then you will have to run an aftermarket radio
__________________
Rancho I Ultra Predator I Trail Grapplers I BB Tune I Headers I Corsa I K&N I Servo I Color Matched
#6
New Member
Join Date: May 2012
Location: Utah
Name: Ty
Posts: 5
Re: Bucket to bench swap, now no rear speakers.
I have everything moved and the wires ran to the sub/amp etc. Everything is plugged in and no loose connections or anything.
#7
FNG/20 years of custom
Join Date: Mar 2012
Location: Midwest
Name: John
Posts: 38
Re: Bucket to bench swap, now no rear speakers.
Do you still have the RSE control, and is there an empty plug for it in the harness you moved? If so just plug it back in and hide it as well.
__________________
#8
New Member
Join Date: May 2012
Location: Utah
Name: Ty
Posts: 5
Re: Bucket to bench swap, now no rear speakers.
No, there is no plug for the RSE controls.
#9
GMFS Member
Join Date: Dec 2005
Location: Berkeley CA
Age: 38
Posts: 2,703
Re: Bucket to bench swap, now no rear speakers.
if you wire the rear speakers to the front it will drop the 2ohm speakers down to about 0ohms, not a good idea.
#10
Wanna B Jack o all Trades
Join Date: Jan 2004
Location: Vancouver/Portland
Name: Scott
Age: 36
Posts: 9,652
Re: Bucket to bench swap, now no rear speakers.
1ohm actually, could just series them, makes a 4ohm load
__________________04 EC Silverado 4.8L,Pioneer, Rockford Fosgate, K&N, Viper, ACT, USSpeedo, Matrix, Whelen, Blackbear, 22" Eagles, Nittos,Russel,Magnaflow 85 S-15 2.5L/4spd, RF T4004, sub & highs, SD 4-link, AIM LCAs, 1/2 valves & compressor, Blazer interior, 17" Eagles w/BFGs, Tailgate skin, phantom grill, 140 amp alt
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
All times are GMT -4. The time now is 10:28 AM .
-- GMFS Dark-Liquid
-- GMFS Light-Liquid
Bucket to bench swap, now no rear speakers.
