GMC Truck Forum banner

Tail Lights

7K views 10 replies 5 participants last post by  Plugger49 
#1 ·
I have a 1-Ton GMC SIERRA with a dump body. The taillights are built into the corners of the dump body. I need to replace the damaged lenses. They look like they may be the ones Glo-Brite made. Glo-Brite is no longer in business,and I can't find anyone that has been any help. Is there anyone that can help,in any way? There has to be some place that has these lenses....? I'd post a photo,but I don't know how.
 
#3 ·
The light cant be "build in". Try fleet products if they are in your area. Most of those bodies use a standard type of light.
 
#6 ·
They are corner mounted(cut),into the body. Their about 6"high x 6 3/4" wide,but curved,so their shaped like an L. I've only seen one other truck with these. Glo-Brite was a huge company. There has to be a ton of their stock sitting somewhere. I have to figure out how to post a photo. Maybe it would help. If there's a whole fixture that would replace it(and fit),I'd go that route. Thanks,all for your help.
 
#9 ·
Do a bit more research. I found that these were also used on motorhomes and wreckers. In particular Safari RVs and Century Wreckers. Based on that I would start with a RV dealer. I would also go for form and fit versus part number. An RV number manufacturer may have changed the part number for their applications. Take in one of your existing ones to see if they can match it up. Also check out a big rig dealer or service center.

Sent from my SM-G935U using Tapatalk
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top