GMC Truck Forum banner

Hyper Z's Sierra

13K views 76 replies 25 participants last post by  Hyper Z 
#1 ·
Added some Bushwhackers. Should be installing 4.56's this weekend.
 
See less See more
1
#52 ·
Added Wilwood 6 piston front calipers and 16" front rotors. For those looking to do Wilwood big brake kit with Fabtech knuckles, you have to grind down where the caliper bracket mounts got them to sit properly. Also you will have to discard brake dust shields- not enough room. I also had 1/2 inch wheel spacers in front, not sure if wheels would cleared without them. I have 20x9 with 0 offset.
 
#54 ·
Steering wheel was getting worn out, so I switched it out for a Grant wheel, easy install. Wish I had done this sooner, wheel is very comfortable and I like the way it looks.
 
#56 ·
Did not want to cam the stock l76 with afm &vvt, so I found a ls3 out of stick 2012 Camaro with some nice upgrades, old motor is out. Have to transfer intakes and oil pans and install a 3200 stall convertor, and get everything back together.
 
#63 ·
Absolutely awesome build. Looks/sounds awesome.
 
#73 · (Edited)
I like the Novakanes so much That I bought them in 22x10.5. These make the 20x9 look tiny. Much better stance. Also got new tires in same size, trying out the Ridge Grapplers, so far I like them. Next thing I want to do is a train horn, because this stock horn sucks.
 
#74 ·
You won't be disappointed in the ridge grapples good choice

Sent from my LG-H871 using Tapatalk
 
  • Like
Reactions: SierraZ570
#76 ·
Those brakes!! Definitely buy a Nathan air chime either k3 or k5 with minimum 5 gallon tank. I run a k3ha on 9 gallons and in love with it. It will go on every vehicle I own!
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top