Just bought a 2016 Crew cab Denali today, looking at the 3.5 inch rcx level, just curious would I have to run .5 inch wheel spacers in the front for this kit? Anyone have this kit on a denali?
Yeah that's what I'm thinking also. I love the looks off it now just wish I had a nice set of tires on it. Debating doing steps on it for my wife. She is wanting the amp steps they are just high as hell. But I don't really want my new seats destroyed either.
Ok I have read this whole thread twice, but my question is, is there any ride or long term difference between doing a kit like the 2.5" Motofab that spaces it all at 1 side of the coil vs a RC that uses the 2" on one end and the .5" on the other? Or does it even matter?
Im planning of doing a 2.5" front an 1" rear on my 2014 Sierra. Going to be using the stock 17 inch rims for now. What size tires would work best. I was thinking 285/70r17's any input or pics would be appreciated.
Im planning of doing a 2.5" front an 1" rear on my 2014 Sierra. Going to be using the stock 17 inch rims for now. What size tires would work best. I was thinking 285/70r17's any input or pics would be appreciated.
285s will look small. Not even fully a 33 and narrow. I say 295/70/17s. I also like the look of the red truck with the 33x12.50x17 a few posts up, but figure that must rub on UCAs and sway bar when turning.
How are your front and rear measurements now? Measuring mine stock, there is almost 2" difference. Thinking 2.5" level, on mine anyway, would have front slightly higher...
17 model with 2.5" level kit up front with 3" blocks in back. truck looks more level than the picture shows. I would not level the front without adding an inch to the back. I don't much care for the look when the back is squatting. Going to change the tires next week to Terra Grappler G2s. Trying to figure out the size needed.
2.5 leveling kit here with 295/55/20! No trimming and looks good anything bigger would have had to trim didn't want to on a new truck MPg defin took a dip but it looks good haha b
2.5 leveling kit here with 295/55/20! No trimming and looks good anything bigger would have had to trim didn't want to on a new truck MPg defin took a dip but it looks good haha b
How much trimming did you have to do if any? I’m going with the RC 5” on my 14’ Sierra and I can’t decide if I want 305 on 20s or 295 on 20s... 20x9 +0 offset and your truck looks great I’d just like to fill the fender wells a little more!
I recently traded in my Tacoma for a ‘14 Z71. I want to level the front and after going around to a couple shops looks like i will be doing in my garage. Which isn’t a problem, but im trying to decide between the rough county and others. The RC kit looks very straight forward to install. I had a full Icon suspension on the Tacoma, and now im trying to decide on a simple level kit
Secondly, im looking to move up from a 265 to a 275 tire with the 18” rim.
Are there any 2.5" levelling kits that will work with the stamped steel control arms and son't require the struts to be taken apart like the Rough Country 2.5" does?
Your grille guard isn't on properly, that would drive me nuts...
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Related Threads
?
?
?
?
?
GMC Truck Forum
5.8M posts
82.6K members
Since 2004
A forum community dedicated to GMC and Chevy full size owners and enthusiasts. Come join the discussion about Silverados, Sierras, and other full size trucks performance, modifications, suspension, lift kits, tires, maintenance, and more!