I just static dropped my truck with a set of 2" spindles and 3" coils on the front and a 6" flip kit and mini notch. I'm currently on the stock 17" Denali wheels and a set of 225/65-17 tires while I save up for a set of bigger wheels and tires. I took the truck to the shop for an alignment and they gave me the old "it's too low for our ramps" song and dance. The camber isn't horrible but it's certainly not correct. Is there a cam bolt or some part I can buy to bring the camber out? I'd like to get it installed and even if it's not 100%, maybe it'll save my inner tire tread til I can find an alignment shop that isn't afraid of a custom vehicle.