GMC Truck Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-7 of 7 Results
  1. Introduction
    Hello, Peoples - I'm Bryce, i own a 1991 chevy k1500, that i am currently trying to get running. It hasnt ran in about 3-4 years. been sitting at my sister-in-laws the whole time. I have steering column issues, wiring issues, battery cable issues, and Timing issues. so any tips...
  2. Introduction
    THIS....is the 1993 K1500 Suburban w 188k that I just purchased. Just replaced the windshield, put on some heavy duty brakes for towing, new differential and got a detail and tune up. Next is headliner, intake, 6inch lift and bigger tires/suspension. And... we'll go from there...
  3. General GM Discussions
    Does anyone know anything about a blue leather interior cause I have a 96 gmc k1500 with a blue leather interior and the driver seat has a small hole but I can't find blue leather in those years anywhere I'm just wondering if its a special interior or something along those lines
  4. Classic GM
    I have a 1989 Chevy K1500 shortbed. I completely converted the interior to a 1997 interior not im doing the wiring part of the build. I have found something online for everything except the climate control. Anyone know about changing the wiring harness and what wires would match up from a 89 to...
  5. Maintenance
    Hey guys, my 1997 K1500 is well overdue for a steering box. 368k miles. I’ve redone the whole front end so there’s obviously slop in the box still. What’s everyone using for a stock replacement? Tried a couple cheap remans just still doesn’t feel all that good. I’m only running 33s and a...
  6. Introduction
    Hey guys. New here. I joined in order to talk to people with like interests and get recommendations on my truck. I have a 1996 K1500 4 door 4wd non Z71 Centurion Conversion. 1 of maybe 6 in 1996. I know Centurion converted 30 or so trucks each year from around 1993 to 2000. Some were 4 door long...
  7. General GM Discussions
    I have a 98 Silverado k1500 with a 383 stroker with about 10k-15k miles on the motor. I have a high pressure high volume oil pump. Usually I would have 50 - 60 psi at idle. Around 80 psi at 3k and above RPM. I had recently changed the oil pan gasket, rear main seal, timing cover. No leaks...
1-7 of 7 Results
Top