GMC Truck Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-6 of 6 Results
  1. Wheels and Tires
    I have a 2015 GMC Sierra 2500 crew cab 4wd with the 6.0. I have the Torsion bars cranked about all the way up where it’s level if not just a little higher in the front now. I have 265/70r17s on stock rims right now and they just look way too small for the truck. I was just wondering if I would...
  2. Wheels and Tires
    Hey all! I recently bought a 95 K2500 4WD 8 Lug 5.7 stock height, the tires on it have a lot of tread but they're hella old and cracked. I don't plan to keep them on long. I found a killer deal on CL for some XD wheels and tires but I am wondering about fitment. I don't want to cut fenders/wheel...
  3. Introduction
    I couldn't find a thread, but I have a 97 C1500 ecsb 2 wheel drive. I'm wanting to eventually do a 4/6 drop and get adapters to run vette wheels on it. I want a squared set up. No staggered fitments. Same wheel size and tire size on all four corners. I'm wanting to know if a 18x10.5 with a...
  4. Wheels and Tires
    Are all 17" 6 lug GM rims the same size bolt pattern
  5. Wheels and Tires
    Good afternoon. I just bought the 2021 GMC Sierra AT4. It came with the LT275 65R18 wheels and tires. It comes with a factory 2” lift. What I want to do is to see how big I can go on a 18” rim and a 20” rim without rubbing or doing any trimming. I can not do a leveling kit for it...
  6. Lifted Suspension & Offroad
    I have a 2016 Silverado that came stock with 22" wheels. Through my shopping around and research, I have found that tires for this size wheel, for a truck with a 5" lift, are not very tall. You can see in the picture the tires leave plenty of room between them and the top of the fender. I am not...
1-6 of 6 Results
Top