GMC Truck Forum banner
1 - 20 of 26 Posts

·
Registered
Joined
·
320 Posts
Discussion Starter · #1 ·
i got a 03 silverado (ext cab) dat i want to drop 2-5. i like the look of the back being just a little lower that the front!! i was wonderin who would yall reccomend me to go wit: BELLTECH or McGAUGHYS??? i've been hearin that djm is shyt so its out my choices. also wut combo could i use to get a 5" drop in the bak??
 

·
I don't have a truck
Joined
·
10,439 Posts
NorcalSS sells Belltech stuff now. He is our DJM vendor but can also get belltech stuff.

Why not go with a 3/6? Flip kit in the rear and a 3" coil or spindle/coil setup up front?
 

·
Verbal Assault Specialist
Joined
·
1,355 Posts
I have been running belltech on my 03 Silvy for 4+yrs/60,000+miles now. spindles, coils, and flip kit. No problems at all with the parts or caused by the parts. Installation instructions were written well and had pictures. Very happy with their products. Can't speak for McGaughys, but I have heard nothing but great things about there products from people on this website.
 

·
Vendor
Joined
·
2,493 Posts
either or they are great kits.

I sell both djm and belltech now so if you are interested in either kit hit me up :)

Tims the man to go with for mcgaughys
 

·
Registered
Joined
·
320 Posts
Discussion Starter · #8 ·
I have been running belltech on my 03 Silvy for 4+yrs/60,000+miles now. spindles, coils, and flip kit. No problems at all with the parts or caused by the parts. Installation instructions were written well and had pictures. Very happy with their products. Can't speak for McGaughys, but I have heard nothing but great things about there products from people on this website.
what kind of shocks u got in it?? n did it need shock extenders on rear?
 

·
Smiggles
Joined
·
3,493 Posts
That's weird. I had stock suspension except belltech spindles and bags. I hated it. Bump steer and camber was insane. It was a white knuckle drive. Now that I built my front around them they work great.
that is wierd, only thing was they pushed my wheels a bit out, otherwise they were worth it :imo
 

·
Smiggles
Joined
·
3,493 Posts
Are you talking about on your obs though?? Totally different design. For a nbs I would go Mcgaughy's 16" spindle with belltech flipkit and coils. The belltech notch is just better.
yea :shake:
 
1 - 20 of 26 Posts
Top