GMC Truck Forum banner

1 - 6 of 6 Posts

·
Fiberglassing Guru
Joined
·
796 Posts
Discussion Starter #1
Having a few issues, and trying to see if it is normal...

Brakes, front and back, both wearing on the inside of the rotor, when I went to change the pads, the fronts looked barely used.

Rattling in drivers side door with window down and driving..

dual climate control AC, if I select AUTO, and set it to 60, AC blows cool, I select the snowflake button, and the air is warm, someone enlighten me on the climate control...

Other than that, everything is running good looking for some input!


Thanks !
 

·
Fiberglassing Guru
Joined
·
796 Posts
Discussion Starter #4
What are the sliders? I replaced all the metal clips when replacing with new pads..

Also got the UJOINTS replaced today, fixed it!
 

·
Registered
Joined
·
5,528 Posts
I believe he is talking about those pins at the top and bottom of the caliper. They don't hold the caliper on, but the brakes move along it to grab the rotor when braking, and allow them to slide out when you relase the brakes. Should one or both sides "stick" too close, they will wear the rotor down.
 

·
Banned
Joined
·
1,500 Posts
did you grease those pins they both mentioned when you did your brakes?
 
1 - 6 of 6 Posts
Top