GMC Truck Forum banner
1 - 20 of 22 Posts

·
Maroon,Black,Chrome
Joined
·
3,347 Posts
Discussion Starter · #1 ·
Can i run a 03+ steering wheel and the air bag in my 01 silverado? I.e. are the air bag connectors the same?
 

·
Maroon,Black,Chrome
Joined
·
3,347 Posts
Discussion Starter · #3 ·
from the best i can tell, yes, i am sure the seering wheel mounts the same and it looks as if the airbag uses the same connector, but i want to make sure, i really don't want it going off if i plug it in.


SO.... ANYONE KNOW?
 

·
SyTy Speed Shop
Joined
·
229 Posts
Id make sure you also install an 03+ clock spring with the newer air bag and wheel. As there could be problems running the 99-02 clock spring with the 03+ air bag. But im not 100% sure on that.
 

·
Puttin 4 Bird
Joined
·
5,842 Posts
the splines don't line up. I tried it before. You'd have to change the whole column.
 

·
Registered
Joined
·
83 Posts
what are the wheel options that we 99-02 owners have? i know i could go billet but id rather have something factory and clean looking
 

·
Smiggles
Joined
·
3,493 Posts

·
Registered
Joined
·
600 Posts
Im so happy i have the whole column out of a 03+ with wheels controls. woot!


now if i ever get around to swapping it.
we need to make this a sticky if you ever get around to doing it :crazy:
You have to do the 03+ column. Then you reuse your multi switch and everything off your old column.
what do you meen by multi switch and has anybody else on here done this before
 

·
Proud W/T Owner
Joined
·
1,529 Posts
what about using a colorado steering wheel in an 03-06 model? just grab the same year colorado
 
1 - 20 of 22 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top