GMC Truck Forum banner

07+ NNBS Tahoe Rim Offset

33925 Views 45 Replies 17 Participants Last post by  8.1 HD
Ok, I'm a little new to the NNBS stuff as well as the 07+ Tahoe's....but is there a certain offset I should look for when I buy rims for it? I want the deep dish, deep lip look :D It'll be dropped 2/3 on 22's.....also what size tire should I run with a 2/3 drop :D Thanks guys! :head:
1 - 20 of 46 Posts
new tahoes need 24s!:D
Sam's old 24s with a 295/30/24 on a 2/3 drop...
See less See more
Huh? Did I miss something? Did you get one?...off to look...
Huh? Did I miss something? Did you get one?...off to look...
:lol: No, no Tahoe yet, just getting ready :D:D


And I don't want to do 24's :D
i would say on a 10inch rim 30
OEM are +31MM.
I thought they were +32MM

:wave:


either way you want 31/32 or higher MM offset.
I thought they were +32MM

:wave:


either way you want 31/32 or higher MM offset.
Hmm, most of the rims I like and are finding are 25 :(
Hmm, most of the rims I like and are finding are 25 :(
you should be fine since youre not going too low... but im not familiar with nnbs trucsk.
you could probably pull off a 25mm+ offset, just depends on the tire you go with.
Thats what I would say. But that white tahoe on the 24s is fucking nice.
:lol: No, no Tahoe yet, just getting ready :D:D


And I don't want to do 24's :D
Buy mine, it's has 22's.
BUMP! If anyone has any pics along with offset and tire size info that would be great :shake:
These work? Will the 25 offset work and be a nice deep lip?? What size tire should I go with?? I want to order rims and tires ASAP :D:D

Ebay Link
nice choice in wheel mauro those will look great :D
nice choice in wheel mauro those will look great :D
I know, I wanna order them but don't wanna get the wrong offset :bawl:
I ran a +40 and +32 with a 24x10 on my truck they recommend high offset wheels on the NNBS trucks
I ran a +40 and +32 with a 24x10 on my truck they recommend high offset wheels on the NNBS trucks
Sorry, you're talking to a lifted guy, I don't know what "high offset wheels" means :lol:

I'm assuming the number (+25,+30, etc) is the distance from the center point on the wheel to the mounting point? Like a -25 is for a lifted truck?? :D
Plus 35 or 40 Mauro
1 - 20 of 46 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top