GMC Truck Forum banner

1 - 8 of 8 Posts

·
Registered
Joined
·
9 Posts
Discussion Starter #1
i have a 07 silverado z71 ext cab with a rough country leveling kit and a tuff country leveling kit. i am goin to do a 3 in body lift with 35x12.5x20 mickey thompson mtz. which offset would be the better choice to fit these tires with less scrubbing? i am goin with the mkw m26 6 lug rims? help would be greatly appreciated!!


size bolt pattern offset backspace hub bore
20 x 9 6X139 +12 mm 5.47" 78.1 mm
20 x 9 6X139 +30 mm 6.18" 100.3 mm
20 x 9 6X139 +12 mm 5.47" 109.8 mm
 

·
GMFS Military Member
Joined
·
10,899 Posts
you are running a top and bottom spacer??? If so..
 

·
2008 RCSB
Joined
·
9,634 Posts
did you cut your upper bumpstops?

:nono:


to answer your question...I had a 3" BL and 2.5" level kit and barely cleared true sized 34x12.50 tires with trimmed fenders, so good luck

20 x 9 6X139 +30 mm 6.18" 100.3 mm <<<< best bet
 

·
Registered
Joined
·
259 Posts
You need to be more specific on the spacers.
im guessing that you have a 2 inch spacer up top and a 1 lower spacer:think: And if you are stacking anything more than that your a :untitled:. Just stack body lift on body lift:imo
 

·
Registered
Joined
·
9 Posts
Discussion Starter #6
yea i have a 2in tuff country on top and a 1.5 on the bottom. my truck sits 40 inches n the front and 39.7 n tha back. my cv angles arent even bad. if i do the 33x12.5x20 which i kno i can fit easily, cause i clear 33s now with no problem. which rim would have the most lip and make my tires stick out the most? thanks
 
1 - 8 of 8 Posts
Top