GMC Truck Forum banner
1 - 8 of 8 Posts

·
Registered
Joined
·
64 Posts
Discussion Starter · #1 ·
Currently I have a 4/6 drop, but I don't like how it looks with 22's. I know I could run 24s but with a very small tire. So what I'm thinking of doing is raising it up and putting 1in coils in the front and 2in leaf springs and 1 in shackles in the back. I don't know what tire size I should run though. any suggestions. Also I'm considering just running 24s with a small tire and leaving it dropped, but I'm afraid that I will bend the rims. Should I be ok or will I mess them up. thanks
 

·
Registered
Joined
·
64 Posts
Discussion Starter · #3 ·
sorry if i confused you. let me try again. I have nbs cc with a 4/6 drop. I have 22s on it right now, but I want 24s. I know I could run a 255 30 24 and keep it that low, but I don't want to bend the rims with that small of a tire. So I want to change the drop to a 1/3, but I don't know what tire size to run. But if running the smaller tire with the 4/6 is an option then I would rather do that. basically i want to know if i'll mess up my rims if I run a small tire like that. i know guys with bagged trucks run them, so i'm kinda thinking about it.
 

·
Officially Tucking Tire
Joined
·
8,919 Posts
im planning on dropping with 24s too.

heres 4/6 on a 275/30/24...




and 2/4 on a 285/30/24...
 
1 - 8 of 8 Posts
Top