GMC Truck Forum banner

1 - 10 of 10 Posts

·
Registered
Joined
·
272 Posts
Discussion Starter #1
Ok so I want to swap my 10 bolt for a 14 bolt out of a vmax. Now my truck has drum brakes and all that. What troubles could I run into during the swap? Is it all just plug and play?

Sent from my SAMSUNG-SM-G900A using Tapatalk
 

·
Banned
Joined
·
4,048 Posts
The Max has drum brakes, and as long as the gears are the same, you will be fine. Just bolt up. You may need to change the yoke or u joint. I just saw that you have a nnbs, and changing from drum to disc is also a plug and play deal.
 

·
Registered
Joined
·
272 Posts
Discussion Starter #3
Oh. The guy said it had discs. And about the u joint can I just get a combo joint?

Sent from my SAMSUNG-SM-G900A using Tapatalk
 

·
Banned
Joined
·
4,048 Posts
Plug and play. Done it several times. Easier to switch yokes.
 

·
Registered
Joined
·
272 Posts
Discussion Starter #5
Sweet. That's what I like to hear. Do you know if they're any wider than the 10bolt

Sent from my SAMSUNG-SM-G900A using Tapatalk
 

·
Registered
Joined
·
272 Posts
Discussion Starter #7
Thank you sir. Now if I can find a front diff. I cam regear them both and throw them under there at the same time

Sent from my SAMSUNG-SM-G900A using Tapatalk
 

·
Registered
Joined
·
1,714 Posts
it takes 15 min to take your current front diff out
 

·
GMFS Enforcer
Joined
·
3,568 Posts
Vmax 14 bolt (AXN axle) has the 14 bolt gears and diff, but it has 10 bolt tubes, shafts, and bearings.
 
1 - 10 of 10 Posts
Top