[philbos81]

can it be done? does this truck have 15's or 16's?

http://www.virginiausedcardealers.com/autosbychoice/21833A.jpg

 

[budrun]

there prob 16.5's. It depends on the year of the truck and the backspacing of the wheels.

 

[gssmith89]

from what I gather, you have to have at least a 16" wheel to clear the front suspension components.

 

[bub]

look like 16's imo.

 

[GeoffSFAs10]

yeah definitly a 16...i dunno why'd you want a stance that wide for DD puposes. my old S10 had a ton of tire sticking out and it was pretty much constantly dirty

 

[Willis]

15s won't fit on NBS unless you grind on your calipers

 

[JoshA]

Yes they will. Here we go again haha 15s will clear if you run spacers on the rear. They will clear the front no problem. If you run 15x14s you dont need spacers.

 

[bub]

^ i'm guessing the backspacing matters too?

 

[JoshA]

Well I always run welds so ya your right on that. I am saying from a weld racing perspective with their huge negatively offset rims. So ya I apologize about that. Found out the hard way on that with my knuckle lift with stock rims, had to run 2 inch spacers to clear them. Probably only needed 1.5" but ya. You can basically whatever you want with spacers.