GMC Truck Forum banner
1 - 20 of 20 Posts

· Line-X of San Antonio
Joined
·
7,270 Posts
Discussion Starter · #1 ·
ive been looking at the weld renegades in 17". the kit im gonna run is made for an 8" wheel. im pretty well set on running the 35/12.50/17 STS tires. i really like the 8.5" wheel better because it doesnt have those gayass fake rivets and writing on the outer ring. but im afraid the STS wont look right on the 8.5 wheel. if i go with the 10" wheel, i might have to use a body lift. that and the 10" wheel will cause more strain on my little 2wd suspension. i need help!
 

· Drive It Like Ya Stole It
Joined
·
7,584 Posts
Get the 8.5" it will look fine since its only 12.5 wide and you wont have to worry about rubbing like you would with a 10" wide. If you change something, change to a different tire.
 

· Registered
Joined
·
3,243 Posts
I dont think you will clear the 35's on 10's with just the fabtech. Not saying it cant be done but I doubt it would fit without some good hacking of some metal.

Its a damn hard decision but I say go with the body lift and 36-14.50 sts on 10's LOL If you are going to make it close might as well go big or go home. I think I have enough room in the rear of my front fenders to run them and rub very little, but I would have to hack on that low hanging gmc bumper for the front of the fender well. And if you are going to run ranchhands might as well run the 14.50 cause you know it will look sweet...
 

· NOT A SHOW TRUCK!!
Joined
·
467 Posts
I cant remember for sure or not but I believe these are 8 inch wheels w/35s and 17s it belongs to a friend of mine but I havent talked to him in a year or so since he moved up close to houston I think 35s on 17x8s will look good on your truck :read:


 

· Registered
Joined
·
1,178 Posts
Aberbaseball7 said:
Would that be in the creepy crawler? Or the Buckshot mudder? The creepy crawler looks like it would be a good all around tire and different... :bowtie:
Yeah, I just checked and it is the creepy crawler. Good looking tire, something similar to a mud terrain. The pricing is not out yet, and its a bias tire, not a radial. It would be nice if there was a 37 14.50 radial, I might have to go w/ the bias creepy crawlers
 

· [>
Joined
·
4,590 Posts
lowred said:
im about 90% sure that im getting the 35x12.50 STS on 17x10 renegades.
:head: That will look good IMO.
8" wheels look good, but I personally like the look of 10's alot better.
Maby a little trim and I think you will be happy :bowtie:
 

· Line-X of San Antonio
Joined
·
7,270 Posts
Discussion Starter · #20 ·
Aberbaseball7 said:
So I guess your going for the full 10" Josh?
yup. might as well. i cant stand the rivets, and writing, but it will look better. im gonna see if i can clear with no body, but who knows...
 
1 - 20 of 20 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top