GMC Truck Forum banner
1 - 2 of 2 Posts

· Registered
Joined
·
14 Posts
Discussion Starter · #1 ·
Hi all,

Everything was ok electrically until a few days ago, and then the following items all became inoperative at (I think) the same time. I've checked all fuses that appear (from owners manual descriptions) to have anything to do with any of the problems, and all the fuses I've checked look good.

.) Interior dome light inop when opening any door (all door switches were fine a few days ago).
Dome light still works ok with roller manual switch, just not with the door switches.

.) Power door locks inop (I can hear relay click in left side of dash but locks don't move).

.) Remote keyless entry inop (doesn't work on any function, lock or unlock).

Everything else seems to be ok, exterior lights, DRL, A/C, blower fan, cruise control.

Any ideas from you who are familiar with the wiring & current flow in these trucks/burbs?

Many thanks in advance,
Marty
 

· Registered
Joined
·
14 Posts
Discussion Starter · #2 ·
Issue resolved. Pwr-Accy fuse (fuse "A" in LH I/P fuse box) was not making correct contact. Fuse was ok when pulled but fuse box prongs had been previously bent to not make proper contact with both legs of the fuse. Problem corrected. We've had this vehicle only a few months, and its amazing that it worked this long.
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top