GMC Truck Forum banner

1 - 9 of 9 Posts

·
Registered
Joined
·
37 Posts
Discussion Starter #1
I just picked up a 1995 2 door hoe 4x4.

I was wondering what it would take to fit 22x14 moto metal 962 wheels with 35s. Would a six inch lift and 2 inch torsion lift do the trick with some add a leafs in the back which would be an 8 inch lift or would I need a body lift?

My other question was, if I decide to go with the 20x12 moto metal 962 wheels with the -44 offset and 35x12.50 tires will a 6 inch lift suffice?

Also let me know if anyone knows where I can pick up a DC lift, I cannot find them anywhere!!! :(

Thanks all
 

·
Registered
Joined
·
137 Posts
Dc lifts can only be had used. A rcx 6" lift is a 4 diff drop and you crank to six. I would think you would need a 6" and a 3" body lift to run a 14" wheel and 35s

Adam
 

·
GM Veteran
Joined
·
607 Posts
20x12 6 inch lift.
22x14 9 inch lift.
Body lifts don't look good on the 2 doors imo. Call full throttle suspension. Their lifts don't require cranking to get the full amount of lift. And no widening of the front wheel tracks.
 

·
GM Veteran
Joined
·
607 Posts
X14's might look bad. My x12's stick out pretty far past the wheel wells. Post pics when done though.
 
1 - 9 of 9 Posts
Top