GMC Truck Forum banner

(2) Spintech Sportsman Street XL Mufflers

1560 24
Sold
1 - 8 of 8 Posts

· Registered
Joined
·
1,025 Posts
Discussion Starter · #4 ·
It's just the muffler, no pipes after, so if you want a turn down, you'll need to install.

I don't have any pictures, but the rust is very minor. I was going to re-install them, but I broke one of the flange bolts, so am going to install a catback instead to stop that minor leak.

Edit: I'll be able to drop one off with Mike this weekend.
 

· Registered
Joined
·
1,025 Posts
Discussion Starter · #10 ·
If Mike's contact falls through, then I'm willing to ship. I didn't think anybody would want to pay for it. I'll even go through with some sandpaper and clean up the surface rust and hit it with some high temp paint. :D

Edit: Soon I'll also have a used 3" Magnaflow X-pipe available and 2 - 3" offset/3" center Xtremeflow mufflers for sale as well. They're a chambered muffler, manufactured by an exhaust shop in Fresno. Stainless steel muffler, with a design very similar to Flowmaster. I get compliments on the sound all the time, but really have way too much drone with a 6.0 and turndowns for me to stand it anymore, especially for a cross-country drive.
 

· Registered
Joined
·
1,025 Posts
Discussion Starter · #13 ·
ship to me! i call one muffler! dibs!
In post 5 Mike said he might have one sold. Said he'd get back to me today. If that one doesn't want to be sold, you've got it.

BTW, spent about 30seconds with some medium grit sandpaper. Rust comes right up. Hit the main weld spots with a wire wheel and it'll look brand new. :head:
 
1 - 8 of 8 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top