GMC Truck Forum banner
1 - 20 of 23 Posts

·
Registered
Joined
·
222 Posts
Discussion Starter · #1 ·
I was wondering if 305 70 16 would be to small for a body lift and ford keys? There goin to be on 16x10 wheels but i cant find the backspacing for them. If anybody could help the wheels are KMC Xd 716.

Thanks alot
 

·
Registered
Joined
·
12,808 Posts
no, they would be just about perfect. You won't be able to fit 35's with those rims anyways.
 

·
Registered
Joined
·
12,808 Posts
Personally I would go with x8's and 35's (315/75) or x10's and 33's (305/70)
Werd, just be careful with the backspacing. You'll still have to trim to fit 35's on an 8" rims or 33's on a 10" if they have less than 4.5" backspacing.
 
Joined
·
13,549 Posts
Werd, just be careful with the backspacing. You'll still have to trim to fit 35's on an 8" rims or 33's on a 10" if they have less than 4.5" backspacing.
didn't even think about that...pay attention to the backspacing. Personally I would run 315/75's on stockers if you bodylift...that ALWAYS looks good to me
 

·
Bayou Surface Drive, LLC
Joined
·
7,961 Posts

·
TEAM WHITE
Joined
·
2,571 Posts

this is how much clearance i have over the 305's on a 16x10.
The cut airdam was done while fitting 295's and no keys.
 

·
Registered
Joined
·
12,808 Posts

this is how much clearance i have over the 305's on a 16x10.
The cut airdam was done while fitting 295's and no keys.
You're also taller than 1500's though.
 
1 - 20 of 23 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top