GMC Truck Forum banner

1 - 8 of 8 Posts

·
Registered
Joined
·
226 Posts
Discussion Starter #1
Ok, I want to add a little touch to the 3rd brake light. I want to find a cover to match the body color. Am I jsut going to have to find a generic cover and paint it?
 

·
Speed Holes
Joined
·
5,190 Posts
I don't know if there's a cover you can get for the light, but you can just give it a nice light even spray of color if you wanted.
 

·
Registered
Joined
·
215 Posts
Yea i would either do the nightshade thing or buy an aftermarket one with LEDs and then nightshade that with a pretty dark coat so you wouldnt see the LEDs until you hit the brakes..:imo
 

·
Registered
Joined
·
3,394 Posts
Maybe wetsand it down and then mix your color paint with clear at say 50/50 mix and apply it on. Keep wetsanding and painting until its dark enough for you. Same way we used to do it when the trend was smoking taillights. If not maybe shave it.
 

·
Registered
Joined
·
3,394 Posts
Maybe your area, it started for us in Cali my freshmen year in high school so four years ago, went out around Junior year so two years ago. Thats my area though. They then started doin the cheap methods and everyone kinda stopped.
 
1 - 8 of 8 Posts
Top