[liftedhd]

just wondering if there was anybody that made a 40x13.5 or 14.5 could also go with a 12.5 just put 38x15.5x16 mickey thompson baja mtz's on and I dont' really need anything that wide but would like to go a little bit taller thanks

 

[GCncsuHD]

Goodyear MTR, ProComp X Terrain both have 40x13.50. Mickey Thompson used to have Baja Claws, MTZs, and Dick Cepek FCIIs in that size I think, but I believe they were discontinued.

 

[2LoNoma]

bfg, and there's a couple swampers in that size as well

 

[2500hdon37s]

I'm guessing Google doesn't work on your internet provider?

all kidding aside there are a good amount of tires that size but most are not too streetable like the swampers.

 

[CowboyKyle]

Your 16" rims are probably going to limit your choices. 17s, on the other hand, there are lots.

 

[l PATRICK l]

Your 16" rims are probably going to limit your choices. 17s, on the other hand, there are lots.

Yeah, I was thinking about Nut Up Racing's Truck? I knew he ran wagon wheels..

 

[GCncsuHD]

Yeah, I was thinking about Nut Up Racing's Truck? I knew he ran wagon wheels..

And he is running 38x15.50x16, the same size as the OP is trying to get away from. 16" will really limit your tire choice, I know Iroks come in 39.5x13.50x16, but I think most of the other choices are for 17" wheels.

 

[BigRedZ-71]

Get a set of 39.5x13.50-16 Irocs if thats the look you are going for

I have the 39.5x13.5x16.5 Irocs on my dodge and they are a good tire but i wish they were a few inches wider like your MTZ's

 

[CowboyKyle]

And he is running 38x15.50x16, the same size as the OP is trying to get away from. 16" will really limit your tire choice, I know Iroks come in 39.5x13.50x16, but I think most of the other choices are for 17" wheels.

He's a slow one. Just go look at his post on the last page or 2 of my build thread. :roflmao:

 

[GCncsuHD]

He's a slow one. Just go look at his post on the last page or 2 of my build thread. :roflmao:

Wasn't my first clue :shake:

Speaking of that, I may have some questions for you in that thread soon :hmm: