[landscrapers]

I started putting new bushings and balljoints in my dually and discovered that the sleeve in the lower controlarm was worn through. They want $350 for a new one from the dealer and that hurts but i found 3/4 ton controlarms in the LMC catalog that look very similar for $100 they are Repro's but for 200 less ill take it if they are the same. can anyone give me any help on this???

Thanks,
Rob

 

[landscrapers]

anyone please..............................

 

[Nicholas]

LMC usually has pretty good repro parts as far as i know...What they have should be what you need.

 

[bagged01extcab]

I'm pretty sure 1 ton and 3/4 ton lower control arms are different. You could try here! I'm sure these guys can answer your questions!
73-87 message board

Trey
Scrapin' Innovations
903-407-0690

 

[Baggedon22's]

I wouldn't purchase reproduction control arms. :read: You would be better off purchasing used ones or pulling a pair from a wrecking yard. Have them powder coated, install new bushings/balljoints, and your set.

BTW, I believe 1/2-ton and 3/4-ton control arms are the same. :bowtie: