GMC Truck Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
1,816 Posts
If you can find a service manual somewhere, that will have it in it. I might in the garage, if I have time tommarow I'll post it, if i have it...

-Andy
 

·
Banned
Joined
·
487 Posts
not to be mean cause i'v did this a lot... but DUH? :think:

Take the flywheel cover off, unbolt the torque converter...... take the starter off, take the tranny bolts out.. take motor mount bolts out.. unhook radiator hoses, power wires, throttle and kickdown linkage, .. hook a chain to it and lift out with a cherry picker. Lift slowly, and watch for stuff you have to unhook yet.. theres always misc. wires and crap, just take your time. Take masking tape and mark of wires/hoses to where they go to.
 
1 - 3 of 3 Posts
Top