GMC Truck Forum banner

90 Ck 3500 4x4 Engine Removal

685 Views 2 Replies 3 Participants Last post by  Rednecked_4x4
Hey Gang,
Just Wondering If Any Of You Know The 454 4x4 Engine Removal Procedure.
1 - 1 of 1 Posts

· Banned
1,807 Posts
not to be mean cause i'v did this a lot... but DUH? :think:

Take the flywheel cover off, unbolt the torque converter...... take the starter off, take the tranny bolts out.. take motor mount bolts out.. unhook radiator hoses, power wires, throttle and kickdown linkage, .. hook a chain to it and lift out with a cherry picker. Lift slowly, and watch for stuff you have to unhook yet.. theres always misc. wires and crap, just take your time. Take masking tape and mark of wires/hoses to where they go to.
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.