GMC Truck Forum banner

1 - 9 of 9 Posts

·
Registered
Joined
·
150 Posts
Discussion Starter · #1 ·
I have a full flip lowering kit for a 96 c1500 truck but could it be used on a 99 2dr Tahoe? i know the leaf springs on a truck are 32" from center to eye and on the Tahoe it is 27 center to eye.
 

·
Registered
Joined
·
53 Posts
Yes it will work bro, we did the same kit on my dads 2dr tahoe. Even though the leafs are longer, the center part of the axle and leafs is the same. Heres the tahoe with flip kit
88_zpsf834765d.png
 

·
Registered
Joined
·
150 Posts
Discussion Starter · #3 ·
Awesome thank you. Any idea what leafs will for the 2 door? I don't have any for mine the wee removed BC this guy was gonna bag it. Wonder if I could use 4x4 leafs and remove the extra leafs.
 

·
Registered
Joined
·
150 Posts
Discussion Starter · #6 ·
ok i hope this helps anyone in my shoes later. The springs are a mfg number 99-202 fitting CHEVROLET BLAZER (1992 - 1994)
CHEVROLET TAHOE (1995 - 1999)
GMC YUKON (1995 - 1997)

These will work from 2wd or 4wd 2dr only. They are 27 inched from center to eye on both ends. the front and rear hangers on the frame are the same on these models also so they can be used. The truck leaves and the suburban cannot be used.
The frames on the 2dr weather it be a 2 or 4wd are exactly the same excluding the front stub.
 

·
Registered
Joined
·
150 Posts
Discussion Starter · #7 ·
hey 1sickcrewcab can you message me if you ahve time 870-378-5386 or on here. I have a few questions.

I was able to get the leafs, hanger front hangers and shackles for 100$. Joys of working at a salvage yard.
 
1 - 9 of 9 Posts
Top