GMC Truck Forum banner

1 - 20 of 22 Posts

·
Asian Cowboy
Joined
·
517 Posts
Discussion Starter · #1 ·
DB Rods made the brackets for the 6 piston front and 4 piston rear. They stripped the frame to go to powdercoating. 14" rotors still look small with the 22" wheels haha

DSC02649.jpg

DSC02641.jpg

DSC02638.jpg

DSC02637.jpg

DSC02635.jpg

DSC02634.jpg

DSC02633.jpg

DSC02632.jpg

DSC02631.jpg

DSC02629.jpg

DSC02628.jpg

Silveradoupdate006.jpg
 

·
Registered
Joined
·
1,437 Posts
Damn thats going to look sic!!
 

·
Asian Cowboy
Joined
·
517 Posts
Discussion Starter · #4 ·
the rear is a custom 4 link by DB Rods. I've got an Eaton LSD for the rear end. Should be pretty nice once the turbo is done.
 

·
Asian Cowboy
Joined
·
517 Posts
Discussion Starter · #6 ·

·
Banned
Joined
·
2,342 Posts
sorry to dig up an old thread........


did you use the 05+ truck rotors for the front and make your own caliper brackets?
 

·
STATIC 4 LIFE
Joined
·
2,923 Posts
right on!!!!!!!!!

You should buy my zr1 vette wheels for a second set of wheels.
They are 17x9.5 up front and 17x11 in the rear.. That would be sick!
 

·
Banned
Joined
·
2,342 Posts
i was just going off the ebay prices when i wrote that....do you have a gm part number for them? I'll have to check with my buddy at the dealer to see what my cost would be.
 

·
layin big rubber
Joined
·
1,457 Posts
$275 ea. shipped for a 6 piston caliper.....? where else are you going to find a 6 piston caliper for less than $1000 each?
$275 for a 6 piston caliper? am i reading this wrong?
where can i find this deal at?
link?
peace
 

·
Asian Cowboy
Joined
·
517 Posts
Discussion Starter · #17 ·
I paid $240 ea...the pads cost just as much as one caliper though...

JYD, are you making the brackets or is John making them for you? He took mine off to copy for somebody...
 

·
Registered
Joined
·
482 Posts
I paid $240 ea...the pads cost just as much as one caliper though...

JYD, are you making the brackets or is John making them for you? He took mine off to copy for somebody...
im making them out of aluminum, a little beefier, based on a set that i got from john. i checked out your truck while i was up there. its looking good. post some pics of the super stealth bed floor. :cool:

and aftermarket pads are only around $150 for the front. and $100 for the rears.

http://www.corvettegarage.com/product/hawk-performance-ceramic-brake-pads-for-c6-z06-corvette.html
 
1 - 20 of 22 Posts
Top