GMC Truck Forum banner
1 - 20 of 34 Posts

· FFR Fabrication
Joined
·
12,383 Posts
Discussion Starter · #1 ·
Well...had some time on my hands today, $8 in the bank, and the idea of doing something to the truck.... This is what I came up with...



 

· Diego Mafia
Joined
·
3,960 Posts
looks good!
 

· FFR Fabrication
Joined
·
12,383 Posts
Discussion Starter · #5 ·
Some sand paper, primer, paint, clear coat, and a black sharpie :crazy:

Sanded down the plastic (too much at first so had to go with a much lighter grit - 400). Taped off the Vortec. Cleaned it up. Primered it. Did about 3 coats of the silver. 2 coats of clear. Pulled the tape off the logo. Used some black sharpie on the black plastic :crazy:. Then 2 more coats of clear over the front where the sharpie is. Then 1 big coat of clear over the whole thing. Came out pretty good IMO
 

· U Mirin' Brah?
Joined
·
6,696 Posts
not bad
 

· FFR Fabrication
Joined
·
12,383 Posts
Discussion Starter · #8 ·
How the truck is sitting now:









 

· Registered
Joined
·
2,304 Posts
Looks good under there man.
 

· Nom Nom Nom
Joined
·
23,348 Posts
shoulda done Fleckstone
 

· FFR Fabrication
Joined
·
12,383 Posts
Discussion Starter · #11 ·

· FFR Fabrication
Joined
·
12,383 Posts
Discussion Starter · #13 ·
18x10s on 38.5x14.5's
 

· FFR Fabrication
Joined
·
12,383 Posts
Discussion Starter · #16 ·
38.5's will be a mistake :imo
Eh... I dont think so... I have more then enough clearance for them and I definitely like the look. It's a contemplation though...I certainly done want to be replacing much more on it.

looks nice man! interested in seeing how well it holds up to engine heat
All High-Temp engine paint... Should be ok. We will see.
 

· California Castaway
Joined
·
12,442 Posts
I thought you were against colormatching :untitled:
 

· FFR Fabrication
Joined
·
12,383 Posts
Discussion Starter · #18 ·
I thought you were against colormatching :untitled:
Shouldn't you be lifting your truck more??


I just dont want to match the handles as things are playing out where it would be unnecessary
 

· FFR Fabrication
Joined
·
12,383 Posts
Discussion Starter · #20 ·
Looks good i did mine also and the plastic radiator cover, and your truck is still sweet...
Thank you sir :shake:
 
1 - 20 of 34 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top