GMC Truck Forum banner
1 - 1 of 2 Posts

· Registered
923 Posts
Discussion Starter · #1 ·
Any reccomendations for an air hammer? I am not sure what the most important thing to look for.. Piston stroke? blows per minute? I am sure it is like anything, there are benefits and drawbacks to each. Seems like the longer stroke ones have a lower BPM. I was browsing the chicago pneumatic site and it seems as they have it listed, the heavier duty they are the BPM goes down.

I was thinking about this one. Seems dollar for dollar a good deal. There are definatly better ones, like almost anything.

Model Number CP715
Part no T023311
Description CP715
Shank Opening .401
Bore Diameter in 3/4
Piston Stroke in 3.50
Weight lb 4.5
Avg. Air Consumption cfm 3.5
Actual Air Consumption @ load cfm 14
Air Inlet Thread Size NPTF in. 1/4
Min. Hose Size in. 3/8
Sound Pressure dB(A) 109
Vibration m/s² 13.7
Blows per min @90 PSI 2,100
1 - 1 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.