[blueice]

has anyone order a 4/6 drop from mcguaghy's? any problems with the kit. i called mcguaghy's and the guy said all i need is the rear shocks and the stock fronts are fine for the kit...are they better than belltech and djm? because mcguaghy's cost $528 while others are $399. thanks guys

 

[blueice]

yeah you should get a c-notch with a 4/6...i think even a 2/4 sometimes...

 

[blueice]

you dont have to notch on a 2/4 but it may bottom out alot.

 

[blueice]

hmm, how common is it to bottom out with a 4/6 and a c-notch?

yeah how common is it...anyone heard about the stock shocks being ok in the front?

 

[blueice]

would i need to get some 17's for the spindles?

 

[blueice]

You can order the spindles with a spacer and you can still run 16's, but I'm not forsure how the spacer works.

If you don't get it you can only run a 20" wheel (MAYBE 19") without doing any modification. If you want to run anything less you have to grind the bolt on the balljoint down or it will hit the inside of the rim, they don't tell you that until you get the instructions.

To make it easy on ya just by my 20" Maxim's off me

how much?

 

[blueice]

got it..