[Tucks20s]

It never bottomed out when I had my 4/6 drop.

I have stock shocks up front on my Sierra, so I don't see why you couldn't use them on a 4/6.

I have McGauhy's 2" spindles on my truck and love them, I'd buy their kit forsure.

 

[Tucks20s]

with the DJM 4/6 I had it was close to stock
I got the 2" Mcgaughy's spindles so I wouldn't have as much camber up front, but I think they nmay have helped the ride a little bit.

 

[Tucks20s]

You can order the spindles with a spacer and you can still run 16's, but I'm not forsure how the spacer works.

If you don't get it you can only run a 20" wheel (MAYBE 19") without doing any modification. If you want to run anything less you have to grind the bolt on the balljoint down or it will hit the inside of the rim, they don't tell you that until you get the instructions.

To make it easy on ya just by my 20" Maxim's off me

 

[Tucks20s]

hey Blueice check your PM's

 

[Tucks20s]

yeah ain't no prob to cut it, but I didn't cut mine with the 6" drop in the back...