GMC Truck Forum banner

Baggin my truck questions

981 Views 9 Replies 3 Participants Last post by  Zach.
First some info on my truck 2000 nbs reg cab short bed I plan on running 22's. After doing some research I've been thinking about going with the thorbeck 4 link and a watts link, is there any reason you guys would suggest different? The reason I'm leaning towards this 4link is because it looks like the main difference between this and more expensive links is that this is not bolt on, but that's not a problem for me. For the front I am planning on running the ekstensive kit that allows you to lay on up to 22's. I just want to get some feedback on these parts and why this would or would not be a good set up to run. I want to do all the research and figure everything out before I start on the truck so everything goes smooth. Thanks you
1 - 2 of 10 Posts
Does any one know with the ekstensive kit they have for the front to lay 22's, not the control arm kit it's pretty much just bag mounts, does the coil bucket get cut off to get replaced with the upper bag mount?
Yeah, the coil pocket will need to be cut off. Then the upper plate will be welded onto the frame.
1 - 2 of 10 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.