GMC Truck Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
1,816 Posts
yeah that would be a zerk...

you take a grease gun, preferably with grease in it, put the end of the hose on the zerk (it fits), then pump the g un and it fills the joint or whatever with grease. I usually go till I see fresh grease come out somewhere.

chassis grease is what I usually call it, comes in tubes for guns. any auto parts store worth its name should have it.
 

·
Registered
Joined
·
1,816 Posts
bggrnchvy said:
Grease all those parts at least every 3000 miles and you should get ALOT of wear out of them, proper lubrication is the key.
:word: For on-road use thats probably a tad much :imo, i try every 5k. But, where the truck is offroad 99% of the time, 3k seems to work good (philmont..)
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top