GMC Truck Forum banner
1 - 2 of 2 Posts

·
HOT AIR BALLOON OWNER
Joined
·
14,932 Posts
If this isn't a vehicle used often and can live w/o OD, go with a TH400. If you need OD, get the 4L80E. The 80E is basically the same with the added OD to it.

A 1/2 ton trans is no bueno for what you're wanting... :nonono:
 

·
HOT AIR BALLOON OWNER
Joined
·
14,932 Posts
Smith said:
Well the truck wont be driven much so no OD isnt needed but what about hooking the electronic transmission up to my truck versus the vacuum controlled 400? I know you just siad 80e just has OD but as far as ease of installation?


You can run a 4L80E full manual control if you choose, that means no electronics. Only standalone box I know of is the Baumann Controller to run an electric shift trnas, I have one for the E4OD going in my F150. :rocking:

Ease of install is hard to say, dependant on your abilities. Either one will require fab-work...
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top