GMC Truck Forum banner
1 - 14 of 14 Posts

·
YUH
Joined
·
7,600 Posts
Discussion Starter · #1 ·
ok ive reached my last straw. i want to get rid of my 3" block for a smaller one. id prefer 2" but i think 1 1/8" from the nnbs probably wouldnt be to bad. lemme know what you guys have and what you want for it shipped to glendale az 85306. soon as i swap out the block my 3" one will be up for sale shipped for exactly what it takes shipped to get the smaller block. ill straight up trade with someone if thatll work too. THANKS
 

·
Desert Rat
Joined
·
3,705 Posts
I dont have any blocks but when you find some PM me because i will be looking for some 3in blocks soon, and i think it was craiglist that had 2 inch OEM blocks from a Z71 for sale
 

·
Flying Low
Joined
·
221 Posts
Why not just cut 1" off the 3" ones you have. I cut 1/2" off the 2" blocks on mine for a total of 9 3/4" drop and 9 to 9 1/2 final drop and not having cali lean after caltracs adjustment. Worked like a charm.
 

·
Flying Low
Joined
·
221 Posts
To each his own. I cut mine cause I couldn't find 1 1/2" blocks, didn't realize having them machine cut was the wrong way.
 

·
YUH
Joined
·
7,600 Posts
Discussion Starter · #14 ·
To each his own. I cut mine cause I couldn't find 1 1/2" blocks, didn't realize having them machine cut was the wrong way.
im not sayin you did them the wrong way man. id just rather swap them for the blocks i want rather than dick around with machining them and not having my whip for a few days. the way this trades gonna work ill just swap the new ones in and then ship mine out.
 
1 - 14 of 14 Posts
Top