GMC Truck Forum banner

1 - 8 of 8 Posts

·
Registered
Joined
·
156 Posts
Discussion Starter #1
Bought new hid lights they came wired just mount harness & plug it in , and they come on but my hazards come on but don't flash but shit off when the lights turn off ? WTf, and now passenger side low beam won't come on, but wil if I plug it into the high beam? Was just working fine


Sent from my iPhone using Tapatalk
 

·
Registered
Joined
·
156 Posts
Discussion Starter #7
Ok I just took a set off my gf's 04 gave me nothing but trouble


Sent from my iPhone using Tapatalk

Now only the right turn signal light in dash stays on, & the low beam passenger side doesn't work I plug the bulb for low beam into high beam and it works fine . Driver side is fine . Passenger side low beam won't come on??? & when they both were and my led bulbs were in the bumper lights it made my flashers come on in dash and stay on not flash. Now it's just one ??


Sent from my iPhone using Tapatalk
 

·
Registered
Joined
·
66 Posts
Did you get this part also HID Xenon Fuse Relay Wire Harness With Resistor Kit. I read on another forum that at least for the 02 Silverado the polarity in the headlight wires are reversed and that wire corrects the problem. I have a set of projector h.i.d lights from them with that wire and no problem
 
1 - 8 of 8 Posts
Top