GMC Truck Forum banner

1 - 6 of 6 Posts

·
Registered
Joined
·
96 Posts
Discussion Starter #1
Replaced Brake Lines on Rear.

Replaced one line from Master Cylinder to ABS.

New front Brakes

New rear Brakes

Gravity Bled all four corners.

Problem....

When truck is off and sitting there is great pedal pressure. When I start the truck the pedal goes straight to the floor and the truck will not move even with my foot off the brake.

i disconnected the abs module and it still does the same thing.

Going to try getting my buddy to hook up his SnapOn Solus tonight to do an automated abs bleed and hope that fixes the problem.

Any other ideas>????
 

·
Registered
Joined
·
96 Posts
Discussion Starter #3
to clarify i gravity bled and also had my gf pump them for me as i cracked the bleeders
 

·
Premium Member
Joined
·
6,277 Posts
might need a tech2 to open and close the abs valves and bleed them
 

·
Registered
Joined
·
96 Posts
Discussion Starter #5
Got the brakes freed up

still having trouble with pedal pressure. hopefully bleeding the abs later will work
 
1 - 6 of 6 Posts
Top