GMC Truck Forum banner
1 - 17 of 17 Posts

·
Registered
Joined
·
133 Posts
Discussion Starter · #3 ·
It's an '02 Silvy with a Denali clip, has a stock 5.3L, tuning, headers, built trans, 20's, polished tb, cold air, stall, it runs pretty good for the little mods he has, I believe it runs a 14.6.
We just put an ls1 cam in it Saturday, what a difference, it pulls pretty hard on the highway now. The ls1 cam is a nice cheap upgrade. You can get these cams for under $50, gaskets are under $20, and it takes about 3-4 hrs to install it. No springs required.

thanks,

allen
 

·
Registered
Joined
·
1,819 Posts
yeah post more....also with the cam does that void warrenty at all....and you say he has a built tranny what did he do to it...i looking to do some tranny upgrades....
 

·
Registered
Joined
·
133 Posts
Discussion Starter · #9 ·
Not sure if it voids the warr. , I think that is up to the delaer. You know how they are, lol.
You can't even tell the truck has the cam, until you get on it.hehe.

I'll find some more,

thanks guys,

allen
 
1 - 17 of 17 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top