GMC Truck Forum banner

1 - 5 of 5 Posts

·
Registered
Joined
·
134 Posts
Discussion Starter #1
So im am gonna install my new cam next weekend and dont know were to start. I searched on here for a cam swap how to but i found nothing. Can anyone lead me in the right direction.
 

·
Registered
Joined
·
330 Posts
I did a cam swap last week, my first ever and I followed the ls1howto.com article to a T. It took me like 10-12 hours to do it all by myself. The cam swap was really really easy, I replaced like 3 or 4 springs with a crowbar compressor and decided it was enough so I made my own version of this:

http://www.ls1tech.com/forums/tools-fabrication/317675-tims-valve-spring-tool-now-available.html

I highly recomend you buy one or make your own, it'll make things easier. Or you can get the Crane tool but it's expensive at $125.

To my surprise I didn't have to take the AC condenser out.
 
1 - 5 of 5 Posts
Top