GMC Truck Forum banner

1 - 15 of 15 Posts

·
Resident Guinea ***
Joined
·
14,535 Posts

·
Cartmans Critters
Joined
·
8,867 Posts
Discussion Starter · #6 ·
Probably. Find the regulators, lock solenoids, harnesses and switches from another truck :imo
Should I just look for a wrecked one? G/Fs going with a gm truck HAS to be reg cab she says. And just about 90% of the ones Im finding are all roll up windows :pissed:
 

·
Registered
Joined
·
275 Posts
You should be able to just swap door's or all the hardware/panel's from a power option vehicle.
For simplicity I would go ahead and put the lock's in also.
Just find a part's truck,alway's useful to have one tucked in the corner of the east lawn.
 

·
concrete *******
Joined
·
1,923 Posts
if you've got manual now it would be easier to just get the spal kit. they give you the plugs and every thing for the manual panels. also it's a pretty easy install. granted stock would look better but...
 

·
HUNTING
Joined
·
941 Posts
I did this to a friends S10. He bought doors from a salvage yard with power windows and locks and all we did was mount them and splice the electrical. It took about 4 hours because of trial and error with the wiring but it came out nice.
 
1 - 15 of 15 Posts
Top