GMC Truck Forum banner
1 - 1 of 10 Posts

· Registered
Joined
·
208 Posts
If you're careful you can use acetone to help but you have to be real careful not to damage the paint underneath...Its what I had to do to get that annoying dealer decal off the back of mine...I suggest you use the heat gun to start and the acetone only if you have to (for example a few little bits that stayed stuck as you took off the majority with the heat gun)

and don't wait too long or you may get a slight difference in the paint where the letters were. The paint under the letters fades slower than the paint on the rest of the tailgate. (actually with as stable as modern paints seem to be it would probably take years and years for there to be a difference).
 
1 - 1 of 10 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top