[Goatman]

I can hear it working and it moves the bar some just not enough to lock and I can hear it all clicking and such. I did have to replace the handles when I got the truck, but I never removed the bars from inside the trucks door.

Now do ya think the grease on the slider arm could be stoppen it from working due to being old?

 

[Silverado demon]

Replace the actuator had the same problem on my 02 replaced the actuator had works perfect now

 

[Goatman]

got a write up for that?

I was told to just clean it cause of the lith. grease getting old and causing it to stick

 

[Silverado demon]

Well here we go
1. Remove door panel
2. Reach into the door and. unlatch the rods connected to actuator remembering where they reattach.
3. remove 3 torque head screws from the door jamb on door side.
4. Gently remove assembly and replace
5. Reassemble
6. I used a Hans manual

 

[Goatman]

i know how and I might try to clean it all first cause it still trys to move back and fourth

 

[Silverado demon]

Mine did also but with mine the plastic housing was broke so it had to be replaced.

 

[Goatman]

Oh fun

 

[Goatman]

I still haven't got around to fixing this lol, but it will move them back when it auto locks