GMC Truck Forum banner

1 - 10 of 10 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter #1
I've got 2" drop spindles in the front of my 97 chevy silverado. I want to put 3" drop coils in the front, but im not sure if it will give me suspension problems. Someone help me out and let me know if this will work or not.
 

·
GMFS OG Member
Joined
·
760 Posts
I've had 3 inch DJM coils on my 93 Sierra for over a year and have had no problems whatsoever. Just be sure to get them from somewhere that sells quality stuff and you'll be fine. :head:
 

·
Orale Homes....
Joined
·
1,796 Posts
You should be ok with a quality spring like Belltech, DJM, or Western Chassis. Make sure that your tire diameter is small enough so that it will not rub.
 

·
03 Tahoe
Joined
·
1,364 Posts
What do you mean by problems? Alignment shouldn't be any problem at all. Depending on what wheel tire combo (rolling diameter) you may need shorter tires....

Cameron
 

·
Registered
Joined
·
1,617 Posts
I had a 3/4 with 3" Eibachs for a year and have had the same coils in the current 5/8 drop for about 4 years with no problems. It rides great with the Doetsch Tech shocks. :D
 

·
Burning Rubber
Joined
·
994 Posts
So are there any Alignment issues(too much negative camber) or problems with a 3" drop coil?
 
1 - 10 of 10 Posts
Top