GMC Truck Forum banner

1 - 13 of 13 Posts

·
Full-time FSC'er
Joined
·
186 Posts
1/2 inch rachets and sockets
pickle fork (gently)
angle grinder
floor jack and jack stands
marker

That is it I believe. Got a 4/8 right now, will be 5/8 when I get tires mounted on my dubs!
 
Joined
·
1,798 Posts
i used,
-flathead screwdrivers
-socket wrenches
-a few BFH's
-breaker bar
-bearing grease
-sawzall (skill metall cutting blades)
-drill (gold dipped bits)
-a good jack
-jack stands
-a few blocks of wood
-locking plyers
-pack of cottering pins
-wd40
and abunch of ther crap i forgot for my 4/6 drop
 

·
resident pyromaniac
Joined
·
7,498 Posts
i used,
-flathead screwdrivers
-socket wrenches
-a few BFH's
-breaker bar
-bearing grease
-sawzall (skill metall cutting blades)
-drill (gold dipped bits)
-a good jack
-jack stands
-a few blocks of wood
-locking plyers
-pack of cottering pins
-wd40
and abunch of ther crap i forgot for my 4/6 drop
thats about it


if he's using LCA's it really wont matter if he busts the ball joints on the old lcas:read: now spindles are a different story...
 

·
Registered
Joined
·
6,655 Posts
sockets, crescents, wrenches, bfh, pickle fork, angle grinder(c-notch), that's about it.
 
1 - 13 of 13 Posts
Top